Simrad GO XSE Installation Manual page 55

Network Name (SSID)
Displays the name of the internal wireless network.
Only visible if the internal wireless is set to Access Point (Internal
Wifi) mode when the device is selected. You can select it and
change the internal wireless network to any name you want for easy
identification.
Network Key
Required by the smartphone or tablet to connect to the internal
wireless network.
Only visible if the internal wireless is set to Access Point (Internal
Wifi) mode when the device is selected. You can select it and
change it to increase network security. The key must be at least 8
characters.
Channel
Only visible if the internal wireless is set to Access Point (Internal
Wifi) mode when the device is selected. Select it to change the
Channel setting to overcome potential interference to the internal
wireless by another RF device transmitting in the same frequency
band.
Restore defaults
Deletes all user made changes, and restores the wireless to factory
settings.
Advanced
Tools are available within the software to assist in fault-finding and
setting up the wireless network.
55
Software Setup | GO XSE Installation Manual