Wireless Setup - Simrad GO XSE Installation Manual

When the configuration is already available on the network, it will
immediately commence uploading to the GO XSE once the
dipswitch is set. Allow this to complete, without interruption.
Setting CZone to display at startup
With this option selected, the CZone control page is shown first,
every time the GO XSE is powered up.
CZone backlight control
Enabling this causes the GO XSE to synchronize its backlight setting
with that of any CZone Display Interfaces set up to share backlight
settings.
Note:
Ú CZone Config also needs to have the GO XSE set as a
controller.
Import and backup a configuration file
The files page may be used to import CZone configuration files, or
export a copy to a memory card in the card reader. Importing
overwrites the existing file on the GO XSE and all connected CZone
devices.
For further information, see "Backing up and Importing user data" on page
53.
Upgrading module firmware
The Files page also allows the loading of NMEA 2000 devices
firmware upgrades. For example, CZone firmware updates. For more
information, refer to "NMEA 2000 device upgrades" on page 54.

Wireless setup

The unit includes built-in wireless functionality that lets you use a
wireless device to remotely view (phone and tablet) and control the
system (tablet only). The system is controlled from the wireless
device by Apps downloaded from their relevant Application store.
Various 3rd party applications can also use the data stream.
Connecting the tablet
1.
Navigate to the Wi-Fi network connection page on the tablet,
and find the unit or GoFree Wifi xxxx network. If more than one is
Software Setup | GO XSE Installation Manual
49