As Of R1.3 - Aastra M720 Installation Manual

• NAME TO BE ASSIGNED: enter the name to be assigned to the model on 20 characters.
• ACTION: select the type of action (add, modify or delete). Name assigning takes effect when
the "Action" field has been validated.
For more information, refer to the operating manual (volume 3), the reference for which is specified
in section 1.6.2.
2.10.1.2 Operation on F4
The MMC XPROGT is used to manage the digital terminals.
This MMC includes several families:
• SET: this is used to:
- view, modify or delete the programming of the keys on a terminal,
- copy the programming of the keys on a terminal to one or more other terminals
provided this is authorised by their configuration,
- list all the programmed keys in compact format for the management centre.
• KEYS AVAILABLE: this is used to view the number of keys that can still be programmed in each
cluster,
• DIGITAL SETS MODEL: this is used to manage the digital sets model codes and associate a
label to them.
Example:
PROGRAMMING TELEPHONE SETS
Subject =Digital set model
---------------------------------------------------------------------------
-----
Model code=145
---------------------------------------------------------------------------
-----
Operation performed
Model code: see the correspondence table on the previous page for the codes of the M7xx range
sets.
For more information, refer to the operating manual, the reference for which is specified in section
1.6.2.
2.10.2

As of R1.3

As of R1.3, management in the PBX is automatic for sets in the M7xx range (except for M725).
AMT/PTD/TR/0001/3/7/EN
Page 2-6
(Ctrl H: Help)
Operation=Display
Label=MC620+MC600+V24.....
Installation Manual for digital sets - IP sets - SIP sets
05/2008 General information