Aastra M720 Installation Manual page 65

Then
Nota :
"CHOOSE DISPLAY LANGUAGE" remains displayed, forcing user selection of the
language, and screen calibration.
Attention :
Example: French chosen.
The user can switchfrom the Azerty keyboard (associated automatically) to the Qwerty keyboard,
while remaining in French.
Screen
Select the language using one of the selection keys
Installation Manual for digital sets - IP sets - SIP sets
Installation of sets in the M7xx range
M780
Choose display language
Only by pressing the red key it is possible to exit this mode without selection, the
standby screen displayed being set to the PBX's language. In this case only
(after disconnecting the set), when the set is started again, this language
selection sequence will be proposed again. This enables the installer to check
the set's operation while maintaining the initial configuration. By default upon
delivery, the set is supplied in English with Qwerty virtual keyboard. If the user
selects "French", the set is associated automatically with the Azerty virtual
keyboard. Nevertheless, the user can change the keyboard setting in the menu
"Config" then submenu "Settings" in the "keyboard" option (only).
PBX menu area
Keybpad < Qwerty >
Language < French >
Setting
-- Ry.yxx--
English
OK
Info Reset
Config
05/2008
UP arrow
OK
(3 col)
or
AMT/PTD/TR/0001/3/7/EN
Page 4-29