8.8
Aastra SIP phone configuration modes
You can configure SIP phones through:
•
Direct access to the phone
•
Access via the phone's WEB interface
•
By loading the configuration files via DHCP/TFTP.
Aastra Matra recommends configuring the SIP phones using the files aastra.cfg and @MAC.cfg, to
allow rational management of a pool of phones.
However, to quickly implement some phones on a breadboard, you may envisage direct
configuration on the phone or via the WEB interface.
Example: configuring an SIP phone in a simplified environment
Figure 8.7
Installation Manual for digital sets - IP sets - SIP sets
SIP PHONEs 480i, 9112i and 9133i
Configuring an SIP phone in a simplified environment
05/2008
AMT/PTD/TR/0001/3/7/EN
Page 8-15