Aastra M720 Installation Manual page 180

• Exit the configuration window using the "Exit" button.
• Uncheck "Allow the service to interact with the desktop" in TFTP-PumpKIN service properties
then restart the TFTP-PumpKIN service.
8.9.3.3 TFTP server provided with the IPS card software
Caution: The IPS card TFTP server can only be used to download Aastra SIP phones (9112i,
The IPS card TFTP server is the atftpd server distributed by Debian.
The default directory is \tftpboot. When installing IPS card software, the directory \tftpboot is empty.
The configuration files, language packs and firmware of SIP phones 480i, 9112i and 9133i are
available in the directory SIP_Sets/480i of NeXspan CDROM software. These files have to be
copied manually to the directory \tftpboot in case of a new installation.
The TFTP server supports 5 simultaneous connections.
Connecting to the IPS card: http://192.168.65.2 (IPS card's default IP address)
• User: webips
• Password: web
The management of files in the \tftpboot directory is facilitated by the use of the software FileZilla,
proposed for downloading in the 'Utilities' tab of the IPS card.
8.9.3.4 Configuring the TFTP server provided with the NSAP software Red Hat 4
Caution: The NSAP TFTP server can only be used to download Aastra SIP phones (9112i, 9133i,
The retained TFTP server package that works on the NSAP server PC is the one basically
provided with RED HAT 4. The package is installed by default upon installation of the operating
system, but requires a configuration in order to be taken into account and to start in automatic
mode.
Follow the procedure below to carry out this configuration:
• Log on as root in the LINUX graphic environment.
• Select the menus "Applications", "System parameters", "Add/Remove applications": the "Add or
Remove packages" window opens.
• In the package group "Servers", tick the option "Inherited network server", then click the details
link. In the window that opens, tick the "Tftp-Server" option. Close the window then confirm the
selection by clicking the "Update" button in the package management window.
• Select the menus "Applications", "System parameters", "Server parameters", "Services". The
service configuration window opens.
• Tick "tftp" and confirm the selection by clicking "Save".
AMT/PTD/TR/0001/3/7/EN
Page 8-30
9133i, 480i).
480i).
Installation Manual for digital sets - IP sets - SIP sets
05/2008 SIP PHONEs 480i, 9112i and 9133i