Aastra M720 Installation Manual page 58

Procedure (before release 1.3):
Once the set is connected, the screen of the M760 displays:
M 760
CHOISISSEZ LA LANGUE DE VOTRE POSTE :
Français
CHOOSE DISPLAY LANGUAGE:
Français
Nota :
"CHOISISSEZ LA LANGUE DE VOTRE POSTE :" (or "CHOOSE DISPLAY
LANGUAGE:" on a set with Qwerty keyboard) remains displayed, prompting the user to
select the language.
Attention :
Select the language using one of the 5 interactive keys matching the language required (the ->
arrow is used to select the other languages available),
Example: Press
2 confirmation beeps, then back to the idle screen
Note: In case of error or change, to change the language,
• Press
• Select the "LANGUAGE" menu using
• Press
AMT/PTD/TR/0001/3/7/EN
Page 4-22
-- R y.yxx--
English Deutsch
English Deutsch
Only by pressing the red key it is possible to exit this mode without selecting a
language, the standby screen displayed (date and time) being set to the PBX's
language. In this case only (after disconnecting the set), when the set is started
again, this language selection sequence will be proposed again. This enables
the installer to check the set's operation while maintaining the initial
configuration.
C H O O S E D I S P L A Y L A N G U A G E :
F r a n ç a i s E n g l i s h
then select a language.
1s
3s
For a set delivered
with Azerty keypad
Nederl.
For a set delivered
Nederl.
with a Qwerty keypad
D e u t s c h N e d e r l .
,
Installation Manual for digital sets - IP sets - SIP sets
05/2008 Installation of sets in the M7xx range
- >