5.4.4
Installation
5.4.4.1
Connections
Refer to the network connection diagram in section 12.1.2.
If required, refer to the mains connection diagram, section 12.2.4.3.
5.4.4.2
Connections
To the LAN: using an Ethernet cable (remote supply possible via the LAN).
Set of 10 Ethernet cables sold in the catalogue under reference HT1455A.
Nota :
If the cord is sleeved, a DH520A adapter must be used.
To the telephone handset: by a coiled cable with an RJ9 type male connector at each end.
To the headset: see Section 12.3.1.
To the mains: by power supply unit (Ref. : PN1121D) if power is not remotely supplied to the set
via the LAN.
5.4.4.3
Default settings on delivery
Installation Manual for digital sets - IP sets - SIP sets
To install sets and cartridges in the i7XX range 05/2008
Current ring tone:
Current ring volume
Private directory ring tone Private
Private directory ring volume
Contrast
Key sound
Headset microphone
Group listening
Handset listening
: 4
: 4
: 8
: 4
: 4
: 4
: 5
: 6
: 5
AMT/PTD/TR/0001/3/7/EN
Page 5-27