Wall Mounting Plate; General Information; Figure 6.5 Side View Of The Wall Mounting Plate - Aastra M720 Installation Manual

6.5

Wall mounting plate

6.5.1

General information

This mounting plate is used to install an M720, M725, M730, M740 or M740E on a wall using a kit
(packet containing 2 screws + 2 pegs as well as an attachment lug for the M725 terminal).
To begin with, the bracket is secured to the sets with 2 screws.
Nota :
Use a "TORX" – size 10" screwdriver.
The screen of the M725, M730, M740 or M740E remains readable in the wall mounted position.
6.5.1.1 Fixing the attachment lug on the M725 set
The M725 set is delivered without a handset attachment lug. This is contained in the wall-mounting
bracket kit and is fixed on the set.
Fixing the attachment lug on the set:
• The attachment lug is fixed on the handset holder, in the two holes provided for this in the set's
casing;
• Bring the bracket opposite these holes, with the small bracket to the top.
• First insert the smallest bracket in the upper hole.
• Then snap in the bracket lug in the upper hole by exerting pressure.
Installation Manual for digital sets - IP sets - SIP sets
M7xx and I7xx set options

Figure 6.5 Side view of the wall mounting plate

05/2008
AMT/PTD/TR/0001/3/7/EN
Page 6-9