To Connect The Sets; To Connect M7Xx Range Digital Sets; To Connect The M780 Set Power Supply Unit - Aastra M720 Installation Manual

12.2

To connect the Sets

12.2.1

To connect M7xx range digital sets

The standard connection for digital sets is given below:
A pair is required to connect the sets. We recommend using a shielded cable that is grounded on
the splitter side.
The line is always wired to the 2 middle contacts of the set's RJ11 connector.
If your configuration is different, cords are available to connect the sets to the telephone network:
Standard wall socket (French type):HK1040B (kit of 10 cords)
RJ11 wall socket:HK1039B (kit of 10 cords)
RJ45 wall socket (with 7 and 8 wired):HK1041A (kit of 10 cords)
Nota : The distance required is 1000 m in 4/10 and 1800 m in 6/10.
12.2.2

To connect the M780 set power supply unit

AMT/PTD/TR/0001/3/7/EN
Page 12-2
Installation Manual for digital sets - IP sets - SIP sets
05/2008 Installation rules