Aastra M720 Installation Manual page 116

5.5.4.9 Summary of installer codes used
Access condition:
After power up, at the end of the
initialisation period, when "?" is displayed
and within 5s
In standby and during a call
After power up, at the end of the
initialisation period, when "?" is displayed
and within 5s (before set version R5.3)
Accessible at any moment as from set
version R5.3
After power up, at the end of the
initialisation period, when "?" is displayed
and within 5s
In standby (as from set version R5.3)
AMT/PTD/TR/0001/3/7/EN
Page 5-46
Code: Function:
* 1 Configuring network parameters
* 2 Viewing the configured parameters
* 5 Viewing the identification parameters
* 7 Configuring Ethernet parameters
* * Restarting the set
Installation Manual for digital sets - IP sets - SIP sets
05/2008 To install sets and cartridges in the i7XX range