Create A New Folder - Baum VarioUltra 20 User Manual

When you enter the File Manager application, you will have access to
the 32GB of internal storage, which is called Flashdisk.
** New ** with v1.4:
Note that file and folder names are always shown in Computer Braille.
At the root position, you will find Flashdisk and the Temp folder. Beside
each name you will find a number range (eg 1 of 2), followed by the date
and time of creation. Note that the date and time stamps rely upon
VarioUltra's time and date being correct.
1. Tap the top or bottom edge of Navistick to move up or down in the
list.
2. Once you reach the bottom or top of list, VarioUltra stops moving
in that direction.
3. To enter the Flashdisk or a folder, tap the right-side edge of
Navistick.
4. To exit out of a folder, tap the left edge of Navistick to return to the
previous location.
5. If you locate a file you would like to open, and it's a supported file
type, just tap B9, or press in on Navistick. VarioUltra will open the
appropriate application and display the file for you.

9.3 Create a New Folder.

Creating a sub-folder in VarioUltra is a simple process. For this step-by-
step set of instructions, we will walk through the steps required to create
a sub-folder within the Edit folder.
1. From within File Manager, make sure you are at the uppermost
level of the file list on the folder called Flashdisk. Enter this folder
by moving the Navistick to the right; a single tap to the right should
do it.
2. Within the Flashdisk folder you will find the Edit folder. Scroll up or
down with the Navistick until you find the Edit folder. Enter this
folder by moving the Navistick to the right; a single tap to the right
should do it.
3. Since the Edit folder is very likely empty, VarioUltra will display a
message telling you as much.
4. At this point, open the command menu (S3) and select menu item
File > New folder.
89