Braille > Default Braille Codes - Baum VarioUltra 20 User Manual

4. Flash Rate: Enter the flashrate in milliseconds. Enter a value
between 200 and 2000. Only appears if Flashing checkbox is
checked.
5. Ok. Select this option to save changes and exit to the Cursor
menu.
6. Cancel. Select this option to abort changes and exit to the Cursor
menu.
10.3.3 Braille > Default Braille Codes.
Use this entry to switch between the various Braille Codes related to the
language you are using. The option Computer braille is related to the
selected Braille table. Once selected, menu items, dialogs, and system
messages are then presented with the chosen braille code. Note that
this setting is not related to the Set Braille Tables option for reading or
writing in the word processor.
Here are the instructions for changing the braille codes:
1. Select main menu item Settings > Braille > Default Braille Codes
to open the dialog.
2. Uncheck the check box "Master Switch Computer Braille".
3. Select the desired entries in the lists.
For Non-English versions of VarioUltra, the list "language" will be visible.
This lets you select the language of the braille code.
In the list "reading default" you can select the braille code to be used for
the braille presentation of menus, dialogs, and system messages.
In the list "writing default" you can select the braille code to be used
when typing text into edit boxes.
With the check box "Display Text of Text Boxes in Reading Braille
Code", you can set the option so that the desired reading braille code is
also used for the presentation of the entries of edit boxes and info fields.
Notes:
1. Note: Some edit boxes (i.e. path information, email addresses,
passwords, etc.) continue to use computer braille. In these cases,
a message appears letting you know.
2. Depending on the selected language, available options may vary.
For example, grade 2 is not supported with all languages.
102