Master Switch: Changing Settings - Baum VarioUltra 20 User Manual

Note:
These profiles dictate which braille is used in Braille Notetaker mode.
The Master Switch feature – explained in section 3.4 – allows you to
toggle between US English Contracted (Grade 2) and Computer Braille
(Default, Profile #1), or
UEB and Computer Braille (Profile #2).
1) To select Computer Braille, hold down B9 and then press display
button 1 (D1).
2) If the default Profile #1 is loaded, hold down B9 and press display
button 2 (D2) to select US English Contracted Braille.
3) If Profile #2 is loaded, hold down B9 and press display button 2 (D2)
to select UEB.
Remember: braille tables do not apply when working with BRF and BRL
braille formats.

3.4 Master Switch: Changing Settings.

** New ** with v1.4:
The Master Switch lets you switch quickly between Computer Braille,
and either US English Contracted Braille (Grade 2), or UEB. This
depends on which profile you have selected. If you have never
knowingly changed the profile, then the default US English Contracted
Braille is what you have.
1) To select Computer Braille, hold down B9 and then press display
button 1 (D1). When selecting this mode, a message will tell you
Master Switch is on.
2) If the default Profile #1 is loaded, hold down B9 and press display
button 2 (D2) to select US English Contracted Braille. When selecting
this mode, a message will tell you Master Switch is off.
3) If Profile #2 is loaded, hold down B9 and press display button 2 (D2)
to select UEB. When selecting this mode, a message will tell you
Master Switch is off.
You can change either or both the input (typing) and output (reading)
braille code. Here are the Instructions:
1) In VarioUltra, go to Settings > Braille > Default Braille Codes.
2) In the dialog, uncheck the "Master Switch" checkbox. This will make
the controls for selecting and changing braille codes, visible. To
48