Date And Time > Date; Date And Time > Time - Baum VarioUltra 20 User Manual

Braille display & notetaker
Hide thumbs Also See for VarioUltra 20:
Table of Contents

Advertisement

Changing Date and Time settings is done inside menu item Settings >
Date and Time. Things that can be changed include the date, time, date
and time format, and the time zone. There are OK and Cancel buttons,
that you use to accept changes you have made, or not.
It is necessary to use US English Computer Braille when entering date
and time information, otherwise your changes will not take effect.
For most people, entering command B9 + D1 will switch VarioUltra to
Computer Braille. Enter command B9 + D2 afterwards to switch back to
the braille you were using before. For more information, refer to section
3.4.
10.6.1 Date and Time > Date.
From within the Settings > Date and Time, the first option on the list is
Date. You will find a date on this line that follows the format
MM/DD/YYYY.
It is necessary to use US English Computer Braille when entering date
and time information, otherwise your changes will not take effect. Enter
command B9 + D1 for Computer Braille. Enter command B9 + D2
afterwards to switch back to the braille you were using before. For more
information, refer to section 3.4.
To make changes, use the cursor routing buttons to position the cursor
one character to the right of whatever section of the date you wish to
change. If you wish to change the entire date, position the cursor to the
right of the 4-digit year, and backspace with braille key B7 until the date
is cleared. Then type the new date following the MM/DD/YYYY format:
2-digit month, slash, 2-digit day, slash, 4-digit year. Confirm your
changes by pressing the left thumb key, B9.
10.6.2 Date and Time > Time.
VarioUltra may not ship with the time and date configured for your time
zone.
It is necessary to use US English Computer Braille when entering date
and time information, otherwise your changes will not take effect. Enter
command B9 + D1 for Computer Braille. Enter command B9 + D2
afterwards to switch back to the braille you were using before. For more
information, refer to section 3.4.
117

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Varioultra 40

Table of Contents