Varioultra V1.33 With An Ios Device (Bluetooth); Varioultra V1.4 With An Ios Device (Bluetooth) - Baum VarioUltra 20 User Manual

Braille display & notetaker
Hide thumbs Also See for VarioUltra 20:
Table of Contents

Advertisement

worth doing. You can find both settings under JAWS Settings Center >
Braille > General.

2.5.5 VarioUltra v1.33 with an iOS Device (Bluetooth).

For this section, we are using an iPhone 6 with iOS 9.3.2 along with a
VarioUltra 40 with version 1.33 software.
Although VarioUltra can be paired with iOS devices running iOS 7 or
later through iOS 8.2, doing so requires you to change the Bluetooth
emulation to VarioConnect or Pronto. The iOS 8.3 and newer versions
include support for VarioUltra, which means the Bluetooth emulation
mode can be left in the default setting. If applicable, refer to section 2.3
for instructions on changing the emulation mode to use with iOS devices
running version 7 through 8.2.
New for VarioUltra version 1.33 is the ability to initiate pairing from your
iOS device. Here are the steps you need to follow:
1) In VarioUltra Braille Notetaker, enter command B9+D1 to switch to
Computer Braille.
2) Next, go to Settings > Bluetooth. If Bluetooth is off, switch it on now.
Do not exit from Bluetooth settings.
3) On your iOS device, go to VoiceOver > Braille settings. Swipe down
to the "Choose a Braille Display and find VarioUltra. Once found,
double tap on VarioUltra to initiate pairing. Enter the pin code 1111
when prompted to do so by your iOS device.
4) VarioUltra will prompt you to accept the pairing from the iOS device.

2.5.5.1 VarioUltra v1.4 with an iOS Device (Bluetooth)

Initiating pairing from an iOS device is easier than ever with VarioUltra
v1.4 software. We even made a short video that takes you through the
different steps: https://youtu.be/ajiunK0WdxE.
Here are the written instructions:
1) Make sure that Bluetooth is on for both VarioUltra and your iOS
device.
2) In VarioUltra Braille Notetaker, go to Settings > Bluetooth.
3) On iOS device, go to VoiceOver > Braille Settings. Swipe right/down
to 'Choose a Braille Display', and located VarioUltra. Double-tap to
initiate pairing.
4) The iOS device will prompt you for a pin. Enter 1111, and swipe
left/up to double tap on 'Pair'.
32

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Varioultra 40

Table of Contents