Varioultra With An Android Device (Bluetooth) - Baum VarioUltra 20 User Manual

with CTRL-OPTION-SHIFT and down arrow on the Mac. When you
hear "BAUM VarioUltra", select the "Select" button to connect.
13) On VarioUltra, Braille Display Mode, press and hold system key 2
(S2) and then tap braille key 4, 5, 6, or 8 to select the appropriate
Bluetooth channel 1, 2, 3, or 4. If your Mac device is connected to
channel 2, you would press and hold S2, and then tap B5. The braille
display will show BT2 My MacBook, or whatever name your computer
has.
Your VarioUltra and Mac computer should now be working.

2.5.10 VarioUltra with an Android Device (Bluetooth).

The following instructions assume you have already enabled the
Talkback screen reader, and that you have downloaded, installed, and
enabled BrailleBack. If not, please refer to the Android Accessibility Help
Center at https://support.google.com/accessibility/android/
instructions. It is very important that BrailleBack be switched on before
starting the pairing process.
Make sure that the VarioUltra emulation is set to VarioConnect.
1) On Android, switch on BrailleBack.
2) On Android, go to Settings > Connections > Bluetooth, and make
sure that the check box under "My Device" is checked so that the
device is visible to VarioUltra and other devices. This will remain
active for 2 minutes.
3) On VarioUltra, go to Settings > Bluetooth. Making sure that the
Bluetooth checkbox is checked, select the option to scan for devices
in range.
4) When VarioUltra displays the results of devices found, locate your
phone name and Navistick down one line to select the Pair option.
5) On Android, enter the pair code 1111. When the pairing is successful,
BrailleBack should chirp, indicating success.
6) Switch VarioUltra to Braille Display mode to connect with your
Android device.
If you prefer to connect VarioUltra natively to an Android device, you can
achieve this by following these additional instructions:
1) On Android, go to the BrailleBack screen and turn off BrailleBack.
2) On VarioUltra, change the emulation from VarioConnect back to
VarioUltra.
3) On Android, go the BrailleBack screen and turn on BrailleBack.
for
39