Connecting With A Paired Bluetooth Device / Wake Up An Ios/Android Device From Standby - Baum VarioUltra 20 User Manual

When the display shows the desired emulation, tap the left thumb key
B9 to confirm and exit back to the Settings menu.
If you use older technology, or an Android device, pairing must always
be initiated from VarioUltra.
2.5.1 Connecting with a Paired Bluetooth Device / Wake up an
iOS/Android device from Standby
There is a required order of things when connecting a paired Bluetooth
device. If your iPhone is on and your VarioUltra is off, switching on
VarioUltra will not result in a connection. If VarioUltra is on, your iPhone
is on, but Bluetooth on your iPhone is off, you will not connect
successfully either.
If you want a stress-free experience, follow these quick tips:
1) Switch on VarioUltra and make sure Bluetooth is on. You can confirm
it's on by selecting any Bluetooth channel with S2 + B4, B5, B6, or
B8.
2) Switch on your other device. Connection should happen almost
instantly.
Special note for iPhone or iPad VoiceOver users:
1) Make sure VarioUltra is switched on; make sure Bluetooth is switched
on.
2) Make sure VoiceOver is switched on and your iPhone or iPad is at
the locked screen.
3) Unlock your iOS device. At this point, VoiceOver will scan for paired
Bluetooth devices in range and connect with this. This should happen
in 5-8 seconds.
When a device connects via Bluetooth, VarioUltra vibrates to indicate
which Bluetooth channel is connected. For example, one vibration for
channel 1, two vibrations for channel 2, etc.
** New ** with v1.4: you can now wake up an iOS or Android device
from VarioUltra. If the iOS or Android device is in standby mode and
within range, from within Braille Display mode on VarioUltra, press the
keys to select the assigned Bluetooth channel (S2) and wait 5-8 seconds
for your device to be wake up.
Requirements:
1) The Bluetooth pairing was initiated by the iOS or Android device.
29