Settings > Bluetooth Menu; Settings > System Menu - Baum VarioUltra 20 User Manual

Also, the capacity of the processor of your connected device is
responsible for the transfer speed. If in doubt, set a value 10 ms
higher.
10.10 Settings > Bluetooth Menu.
Menu item Settings >Bluetooth opens a dialog where you can adjust
settings relating to Bluetooth connections, including pairing with other
devices.
Options in the Settings > Bluetooth menu include:
1. Bluetooth On/Off (Checkbox): When checked, Bluetooth is
activated. When unchecked, Bluetooth is off. If you're not actively
connected with a device, switching off Bluetooth can lengthen the
number of hours you will get from the battery.
2. Scan: only visible when Bluetooth is on. Scan initiates a scan of
devices within range and presents them in a horizontal list after
scanning is complete.
3. Device: a list of found Bluetooth devices.
a. "Trusted" indicates that pairing has already been
established.
b. "In Range" indicates that you can start a pairing.
c. Pair: a button that starts the pairing process with the
selected device.
4. Depending on the pairing process, you will get other messages
asking you to enter a PIN code on the other device, or on
VarioUltra.
5. The default PIN code is 1111 for most pairing processes.
6. Remove Device: a button that lets you unpair from a device. This
option is only visible when at least one paired device is present in
the device list.
7. Show Bluetooth Info: a button that opens a dialog with detailed
information about the Bluetooth connection. You can change the
Device Bluetooth name if you wish. This is especially helpful in
environments where more than one person owns/uses a
VarioUltra.
Note: previously paired devices that are no longer in range may continue
to appear in the scan results for Bluetooth devices. If you prefer not to
see these devices shown, just scroll to the device name in the list, scroll
down to the line below the name, and select the Remove Device option.
10.11 Settings > System Menu.
127