Table of Contents
Advertisement
10.3.1.3 Braille > Show Messages With/Without Word Wrap.
This option is self-explanatory. When selected from the menus, it
presents a single line with a checkbox. If the box is checked, messages
will be displayed with word wrap on. Uncheck the box and words may be
split at the end of a line.
Note: this mostly affects the VarioUltra 20 because most messages fit on
a single line of the VarioUltra 40 display.
10.3.1.4 Braille > Dot Strength.
With the introduction of VarioUltra software version 1.4, a new feature is
unlocked for some newer VarioUltra units built since late 2016.
With this horizontal list, you can choose between three dot strength
options. The default is Medium.
Dot strength means that the dots of the braille cells appear software or
more pointed, depending on the option you choose. The choices affect
the strength used to push up the braille dots.
10.3.2 Braille > Cursor menu.
The Cursor option contains settings relating to the appearance of the
cursor in Edit Mode and Reading Mode. The types of cursor styles
include dot 7, dots 7 and 8, or any other shape you choose. Finally, the
cursor you choose can be static, inverted, or flashing at a user
adjustable blink rate.
Reading Mode
Reading Mode applies whenever a write-protected file is opened.
Options you can change include:
1. Cursor shape. Enter the dot pattern you prefer to read when a
cursor is displayed. Default is dot 8.
2. ** New ** with v1.4: to hide the cursor, delete the content of this
edit box with B9B7 and immediately confirm OK.
3. Inverted On/Off (Checkbox). When checked, the dot pattern
selected for the cursor will be inverted. If you selected dots 78 for
the cursor and then inverted it, dots 123456 would be shown
instead.
100
Hide quick links:
Advertisement
Table of Contents
