Axles Retracted In Out Of Transport Position; Axles In Transient State - JLG 1850SJ Operation And Safety Manual

Axles Retracted In Out of Transport Position

When the axles are retracted and the machine is in out of trans-
port position, the display will switch between axles extended and
retracted every 0.5 seconds to tell the operator to extend the
axles so the boom can be raised.
3121618

Axles In Transient State

Figure 5-22. Axles In Transient State Screen
– JLG Lift –
SECTION 5 - LCD DISPLAY PANEL
When the operator is extending or retracting the axles, the Axles
In Transient State screen will show and the arrows showing axle
travel direction will flash. When the axles are not fully extended
or retracted and no axle functions are selected, the green arrows
will show steadily.
5-23