JLG 1850SJ Operation And Safety Manual page 67

16. Soft Touch/SkyGuard Override Switch (If equipped)
The machine can be equipped with one of three options. It
may have Soft Touch, SkyGuard, or both Soft Touch and Sky-
Guard.
If equipped with Soft Touch, the switch
enables the functions that were cut out
by the Soft Touch system to operate
again at creep speed, allowing the
operator to move the platform away from the obstacle that
caused the shutdown situation.
If equipped with SkyGuard, the switch
enables functions cut out by the Sky-
guard system to be operated again,
allowing the operator to resume use of
machine functions.
If equipped with both Soft Touch and
SkyGuard, the switch operates like
described above and allows the opera-
tor to override the system that has
experienced a cutout situation.
3121618
SECTION 3 - MACHINE CONTROLS AND INDICATORS
UPON ACTIVATING THE JIB STOW CONTROL SWITCH, A SLIGHT DELAY WILL BE EXPE-
RIENCED BEFORE THE JIB WILL BEGIN TO MOVE.
17. Jib Stow
Allows the jib to be returned to the stowed
position for transport and also taken out of
the transport position for machine usage.
This control operates both jib swing and the
jib lock pin in a coordinated manner.
NOTE: The Jib Telescope function only operates in the 500 lb. (227 kg for
ANSI markets and 230 kg for CE and Australia markets) capacity
mode.
18. Jib Telescope
Provides extension and retraction of the jib.
– JLG Lift – 3-23