Supplemental Information - JLG 1850SJ Operation And Safety Manual

Table 7-14. Wheel Torque Chart
TORQUE SEQUENCE
1st Stage
35 ft. lbs.
(45 Nm)
4. Wheel nuts should be torqued before first road use and after
each wheel removal. Check and torque every 3 months or
150 hours of operation.
3121618
SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
2nd Stage 3rd Stage
80 ft. lbs. 140 ft. lbs.
(100 Nm) (185 Nm)
7.4

SUPPLEMENTAL INFORMATION

The following information is provided in accordance with the
requirements of the European Machinery Directive 2006/42/EC
and is only applicable to CE machines.
For electric powered machines, the equivalent continuous A-
Weighted sound pressure level at the work platform is less than
70dB(A)
For combustion engine powered machines, guaranteed Sound
Power Level (LWA) per European Directive 2000/14/EC (Noise
Emission in the Environment by Equipment for Use Outdoors)
based on test methods in accordance with Annex III, Part B,
Method 1 and 0 of the directive, is 111 dB.
The vibration total value to which the hand-arm system is sub-
jected does not exceed 2,5 m/s
value of weighted acceleration to which the whole body is sub-
jected does not exceed 0,5 m/s
– JLG Lift –
2
. The highest root mean square
2
.
7-23