JLG 1850SJ Operation And Safety Manual page 68

SECTION 3 - MACHINE CONTROLS AND INDICATORS
19. Soft Touch/SkyGuard Indicator (If Equipped)
Indicates the Soft Touch bumper is against an object or the
SkyGuard sensor has been activated. All controls are cut out
until the override button is pushed. For Soft Touch, controls
are then active in the Creep Mode or for SkyGuard, controls
will work normally.
20. Platform Rotate
Allows the operator to rotate the platform to
the left or right.
21. Lock Pin Indicator
When illuminated, indicates the jib is
centered and the jib lock pin is
engaged. When blinking, indicates the
jib is in the process of being stowed or centered. The indica-
tor is off when the lock pin is disengaged and the jib is
stowed (machine in transport position).
3-24
22. Function Speed Control
This control affects the speed of main boom
telescope, jib telescope, and jib lift. Turning
the knob all the way counterclockwise until
it clicks puts drive, main lift, platform rotate,
and swing into creep mode.
NOTE: To operate the Main Boom Lift/Swing joystick,
pull up on the locking ring below the handle.
NOTE: The Main Boom Lift/Swing joystick is spring
loaded and will automatically return to neutral
(off) position when released.
23. Main Lift/Swing Controller
Provides main lift and swing. Push
forward to lift up, pull backward
to boom down. Move right to
swing right, move left to swing
left. Moving the joystick activates
switches to provide the functions
selected.
– JLG Lift – 3121618