Part Names / Included Items; Part Names And Functions - Roland DWX-50 Setup & Maintenance Manual

Part Names / Included Items

Part Names and Functions

Front and Interior
Front covers
(upper and lower)
The front covers open upward and
downward. To ensure safety, open-
ing either of these during cutting or
spindle rotation causes an emergency
stop to occur.
ATC Magazine
(Automatic Tool
Changer)
P. 27, "ATC Maga-
zine (Automatic Tool
Changer)"
LED Lamp
Switch
*NOTE: In this manual, the mechanisms around the spindle unit, including the spindle motor, are called the
"spindle head. " Also, the rotary-axis area inside the spindle unit is called the "spindle. "
26 26
Chapter 1 Installation and Setup
Main-
Clamp
Rotary
axis unit
Spindle head*
Spindle Unit
LED Lamp
This is the lamp that
lights up the inside of
the machine.
Built-in panel
This is the operation
panel installed on the
cutting machine.
Dust collection capsule
The dust collection capsule
prevents cutting dust from
blowing out and helps suc-
tion. The cover can be de-
tached.
Dust Collection Hose
Duct
Attach the dust collection
hose.
Collet