Main Specifications; System Requirements For Usb Connection - Roland DWX-50 Setup & Maintenance Manual

Main Specifications

Cuttable material
Loadable workpiece
shape
Operating speed
Spindle motor
Spindle speed
Rotary axis travel
angle
Number of tools
housed
Attachable tool
Compatible
compressed air
Interface
Control command set
Power requirements
Power consumption
Operating noise
External dimensions
Weight
Installation Environ-
ment
Included items

System Requirements for USB Connection

Computer
USB cable
Zirconia (pre-sintered), modeling wax, PMMA
Disc External diameter (level section): 98 mm to 100 mm
(with levels) External diameter (body section): 95 mm
Height (level section): 10 mm
Height (body section): 12 to 26 mm
Disc External diameter: 98 to 100 mm
(without levels) Height: 10 to 14 mm, 16 to 20 mm
Block Width x Depth: 38 x 76 mm, Height: 16 or 22 mm
X and Y axes: 6 to 3600 mm/min. (0.24 to 141.73 in./min.)
Z axis: 6 to 1800 mm/min. (0.24 to 70.87 in./min.)
Brushless DC motor, maximum 100W
6,000 to 30,000 rpm
A: ±360°, B: ±20°
5
Shank diameter: 4 mm, Length: 40 to 55 mm
0.02 to 0.2 MPa
USB (compliant with Universal Serial Bus Specification Revision 1.1)
RML-1, NC code
Voltage and frequency: AC100 to 120 V/220 to 240 V ±10%, 50/60 Hz (overvoltage
category II, IEC 60664-1)
Required power capacity: 2.8 A (100 to 120 V)/1.2 A (220 to 240 V)
Approx. 275W
During operation: 70 dB (A) or less (when not cutting)
During standby: 45 dB (A) or less
Width x Depth x Height: 656 x 656 x 557 mm (25.9 x 25.9 x 22 in.)
50 kg (110 lb)
Operating environment: Temperature of 5 to 40°C (41 to 104 °F), 35 to 80% relative
humidity (no condensation)
Ambient pollution degree: 2 (as specified by IEC 60664-1)
Power cord, USB cable, Setup and Maintenance Guide, Roland Software Package
CD-ROM, Detection pin, Hexagonal screwdriver, Hexagonal wrench, Cap (S and L),
Clamp for block workpiece (A and B), Tool holder, Tool positioner, Dust collection
hose, Regulator, Dust tray etc.
Model preinstalled with the 32- or 64-bit edition of Windows 7, Vista, XP, or upgraded
computer originally preinstalled with Windows XP or later
Use the included USB cable.
DWX-50
Chapter 3 Appendix
Specifications
63