Preparing The Machine For Use; Step 1: Checking The Included Items - Roland DWX-51D Setup Manual

Preparing the Machine for Use

STEP 1: Checking the Included Items

The following items are included with the machine. Make sure they are all present and accounted for.
Power cord (1)
Pin-type material
adapter(1)
Milling bur holders (10)
Screws(for regulator
and dust collection
hose adapter) (4)
Dust collection hose
adapter (1)
Torque screwdriver (1)
Assembly Instructions
Check the attachment
orientation.
Insert firmly in the direc-
tion of the arrows until it
clicks into place.
Lightly tug on the driver
bit to make sure it does not
come loose.
USB cable (1)
Automatic correction
jig (1)
Mounting screws (20)
Hexagonal screwdriver
(1)
Spanner (1)
Regulator (1)
Detection pin (1)
Screws
(spares for clamp) (2)
T-shaped hexagonal
screwdriver (1)
Cloth for care (1)
Ferrite Core (1)
Air hose (1)
Milling bur positioner
(1)
Screws
(spares for pin-type
material adapter) (2)
Dust collection hoses
(long, short)(2)
Roland Software
Package CD (1)
Setup Guide
(This manual) (1)
23