Roland DWX-50 Setup & Maintenance Manual page 48

Before Starting the Operation

Insert the detection pin to No.5 on ATC Magazine.


46
Chapter 1 Installation and Setup
Close the front cover.
Click
VPanel.
Click [Maintenance] tab.
Put a check in "Correct magazine" and
"Correct rotary axis" of Operation.
Click
The automatic correction starts.
BUSY LED lights up during the operation of the
automatic correction. When the operation finishes
and the message, "Operation is complete," appears,
click [OK].
The automatic correction is complete.
Insert the detec-
tion pin firmly.
on top window of
.