Unpacking
Retaining materials are attached to protect the machine from vibration during shipment. When installation is
completed, remove these and store in the specified locations.
Remove all retaining materials. Any that remain may cause faulty operation or breakdown when the power
is switched on.
The retaining materials are required when moving the machine to a different location. Store them carefully
so that they do not get misplaced
WARNING
Removing the retainers
Make sure the power cord is unplugged, and remove the retainer A, B, and C. The removed retainers can be
attached to the machine to store them.
Retainer A
Carry out these operations before you connect the power cord.
Inadvertent powerup may result in pinched hands or other injury.
Retainer C
Storing the retainers
Retainer B
*Use cap screws for fastening.
Retainer B
Retainer A
Chapter 1 Installation and Setup
Installation
Retainer C
33