How To Connect The Dust Collection Hoses - Roland DWX-50 Setup & Maintenance Manual

Installation

How to Connect the Dust Collection Hoses

Connect the supplied hose and the dust collector as shown in the figure.
*You need to prepare a dust collector separately.
 P. 29, "Opening Size to Connect a Dust Collector"
* We recommend grounding the hose with the ground wire because the hose often bears the static electric-
ity. Remove the screw at the location shown in the figure with a commercially available Phillips screwdriver.
Connect the ground wire with that screw.
Dust Collector
Dust collection hose
Screw
Ground Wire
34
Chapter 1 Installation and Setup