Roland DWX-50 Setup & Maintenance Manual page 15

Warning labels are affixed to make areas of danger immediately clear. The meanings of these
labels are as follows. Be sure to heed their warnings.
Also, never remove the labels or allow them to become obscured.
Top
Never use a pneumatic
blower.
This machine is not com-
patible with a pneumatic
blower. Cutting waste may
get inside the machine
and cause fire or electrical
shock.
Warning Labels
Front/Inside
Caution: Sharp Tool
Inadvertent contact
may cause injury.
To Ensure Safe Use
Caution: High Temperature
It becomes hot. Exercise cau-
tion to avoid fire or burns.
Rear
Caution: High Voltage
Cover removal may pose
hazard of shock or electro-
cution due to high voltage
13