Installing And Setting Up The Software; System Requirements; The Software You Can Install And Set Up; Installing The Windows-Based Driver - Roland DWX-50 Setup & Maintenance Manual

Installing and Setting Up the Software

System Requirements

Operating system
CPU
Memory
Optical drive
Video card and monitor
For the latest information, see the Roland DG Corp. website (http://www.rolanddg.com).

The Software You Can Install and Set Up

VPanel for DWX-50
Windows Driver
(DWX-50 Driver)
In addition, "DWX-50 Operation Guide" (Electronic-format Manual) is to be installed.
 P.40, "Installing DWX-50 Operation Guide (Electronic-format Manual)"

Installing the Windows-based Driver

Keep machine and the computer unconnected until you carry out this installation operation. Failure to follow
the correct procedure may make installation impossible.
 P.56, "Installation is impossible"
Procedure

Before you start installation and setup, make sure the USB cable is NOT connected.

Log on to Windows as "Administrator."

Insert the Roland Software Package CD-ROM into the computer.
(Windows Vista or 7 : When the automatic playback window appears, click [Run menu.
exe].)
The setup menu appears automatically.
38 38
Chapter 1 Installation and Setup
Windows XP/Vista/7 (32,64 bit edition)
The minimum required CPU for the operating system
The minimum amount of required RAM for the operating system
CD-ROM drive
At least 256 colors with a resolution of 1,024 x 768 or more recom-
mended)
This is a dedicated program for controlling the modeling machine. You
operate the modeling machine and make various settings using this
program.
This is a Windows-based driver required for sending data from a computer
to the machine.