Note:
Manually setup time will take effect immediately after saving and applying change in the Web GUI. If users
would like to reboot the UCM6510 and keep the manually setup time setting, please make sure "Remote
NTP Server", "Enable DHCP Option 2" and "Enable DHCP Option 42" options under Web GUISystem
SettingsTime SettingsTime Auto Updating page are unchecked or set to empty. Otherwise, time
auto updating settings in this page will take effect after reboot.
Office Time
On the UCM6510, the system administrator can define "office time", which can be used to configure time
condition for extension call forwarding schedule and inbound rule schedule. To configure office time, go to
Web GUISystem SettingsTime SettingsOffice Time. Click on "Create New Office Time" to create
an office time.
Figure 58: Create New Office Time
UCM6510 IP PBX User Manual
P a g e
|
91