Email; Email Settings; Table 18: Http Server Settings; Table 19: Email Settings - Grandstream Networks UCM6510 User Manual

Redirect From Port 80
Protocol Type
Port
Once the change is saved, the web page will be redirected to the login page using the new URL. Enter
the username and password to login again.

Email

Email Settings

The Email application on the UCM6510 can be used to send out alert event Emails, Fax (Fax-To-Email),
Voicemail (Voicemail-To-Email) and etc. The configuration parameters can be accessed via Web
GUISystem SettingsEmail Settings.
TLS Enable
Type
Domain
Server
Username
Password
Display Name
Sender

Table 18: HTTP Server Settings

Enable or disable redirect from port 80. On the PBX, the default access
protocol is HTTPS and the default port number is 8089. When this option is
enabled, the access using HTTP with Port 80 will be redirected to HTTPS
with Port 8089. The default setting is "Enable".
Select HTTP or HTTPS as the protocol to access the HTTP server. The
default setting is "HTTPS". This also defines whether to use HTTP or
HTTPS to download the config file in zero config as the UCM6510 is served
as HTTP/HTTPS server that has the device config files for zero config.
Specify port number to access the HTTP server. The default port is 8089.

Table 19: Email Settings

Enable or disable TLS during transferring/submitting your Email to another
SMTP server. The default setting is "Yes".
•
MTA: Mail Transfer Agent. The Email will be sent from the configured
domain. When MTA is selected, there is no need to set up SMTP server
for it or no user login is required. However, the Emails sent from MTA
might be considered as spam by the target SMTP server.
•
Client: Submit Emails to the SMTP server. A SMTP server is required
and users need login with correct credentials.
Specify the domain name to be used in the Email when using type "MTA".
Specify the SMTP server when using type "Client". For example, if using
Gmail as the SMTP server, you can configure it as smtp.gmail.com:465.
Username is required when using type "Client". Normally it's the Email
address.
Password to log in for the above Username (Email address) is required
when using type "Client".
Specify the display name in the FROM header in the Email.
Specify the sender's Email address.
For example: pbx@example.mycompany.com.
UCM6510 IP PBX User Manual
P a g e | 84