Port Forwarding; Table 11: Ucm6510 Network SettingsPort Forwarding; Figure 28: Ucm6510 Static Route Configuration - Grandstream Networks UCM6510 User Manual

Port Forwarding

The UCM6510 network interface supports router functions which provides users the ability to do port
forwarding. If the UCM6510 is set to "Route" under Web GUISystem SettingsNetwork
SettingsBasic Settings: Method, port forwarding is available for configuration.
The port forwarding configuration is under Web GUISystem SettingsNetwork SettingsPort
Forwarding page. Please see related settings in the table below.
Specify the WAN port number or a range of WAN ports. Unlimited number of ports
can be configured.
Note:
WAN Port When it is set to a range, WAN port and LAN port must be configured with the same
range, such as WAN port: 1000-1005 and LAN port: 1000-1005, and access from
WAN port will be forwarded to the LAN port with the same port number, for example,
WAN port 1000 will be port forwarding to LAN port 1000.
LAN IP Specify the LAN IP address.
Specify the LAN port number or a range of LAN ports.
Note:
When it is set to a range, WAN port and LAN port must be configured with the same
LAN Port
range, such as WAN port: 1000-1005 and LAN port: 1000-1005, and access from
WAN port will be forwarded to the LAN port with the same port number, for example,
WAN port 1000 will be port forwarding to LAN port 1000.
Select protocol type "UDP Only", "TCP Only" or "TCP/UDP" for the forwarding in the
Protocol Type
selected port. The default setting is "UDP Only".

Figure 28: UCM6510 Static Route Configuration

Table 11: UCM6510 Network SettingsPort Forwarding
UCM6510 IP PBX User Manual
P a g e | 64