•
Added office time and holiday setting support. [Office Time] [Holiday]
•
Added time condition for call forward. [EXTENSIONS]
•
Added support to monitor FXO trunk using SLA. [SLA STATION]
•
Added One-Key Dial function.
•
Added Follow Me support. [FOLLOW ME]
•
Supported external number as the key pressing event of an IVR.
•
Improved APIs for Zero Config templates and settings. [PROVISIONING]
•
Supported GXP16XX, Surveillance and GS_wave models in Zero Config. [PROVISIONING]
•
Added advanced settings for devices discovered in Zero Config. [Device Configuration]
•
Added ability to delete multiple recording files at one time. [Recording Files]
•
Added call queue destination if no answer/timeout. [Table 82: Call Queue Configuration Parameters]
•
Added call queue Music on Hold customization. [Table 82: Call Queue Configuration Parameters]
•
Added restricted AMI access. [AMI]
•
Added ability to choose the type(s) of files to be cleaned in cleaner.
•
Added DTMF configuration per SIP trunk. [Table 61: Create New SIP Trunk]
•
Added ability to upload and play ring group announcement. [Table 80: Ring Group Parameters]
•
Added ability to upload and play paging call announcement. [PAGING AND INTERCOM GROUP]
•
Added Alert-info configuration for distinctive ringing on inbound route. [Table 70: Inbound Rule
Configuration Parameters]
•
Added ability to prepend digits/trunk name to inbound calls' caller ID. [Table 70: Inbound Rule
Configuration Parameters]
•
Modified Static Routes Interface display when network method is changed. [Static Routes]
Firmware Version 1.0.0.25
•
This is the initial version.
UCM6510 IP PBX User Manual
P a g e
|
30