Table of Contents
Advertisement
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
Local Messaging
Examples
Local/Remote
This variable defines the type of communications that is used. Always use
local when you need point-to-point communications via DF1 Full-Duplex
or network communications such as Ethernet/IP, DeviceNet (using
1761-NET-DNI), DF1 Half-Duplex, or DF1 Radio Modem. For DH-485, use
local if the target node is on the same DH-485 network as this controller,
or remote if the path to the target node goes through one or more
communication bridges.
Five examples of local messaging are shown in this section:
• 500CPU message type
• 485CIF message type
• PLC5 message type
• Modbus RTU Message type
• EtherNet/IP Message type
A summary of the message instruction configuration parameters is shown
in the following table.
Communications Instructions
Publication 1763-RM001B-EN-P - April 2007
373
Hide quick links:
Advertisement
Table of Contents
