efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
100
Using the High-Speed Counter and Programmable Limit Switch
Publication 1763-RM001C-EN-P - October 2009
Low Preset Reached (LPR)
Description
Address
Data Format HSC Modes
LPR - Low
HSC:0/LPR bit
Preset
Reached
(1) For Mode descriptions, see HSC Mode (MOD) on page 107.
The LPR (Low Preset Reached) status flag is set (1) by the HSC sub-system
whenever the accumulated value (HSC:0.ACC) is less than or equal to the
low preset variable (HSC:0.LOP).
This bit is updated continuously by the HSC sub-system whenever the
controller is in an executing mode.
(1)
Type
User Program Access
2 to 7
status read only