Table of Contents
Advertisement
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
Target Integer File Number (TIF)
Feature
TIF - Target Integer File
Number
Target Integer File Number (TIF) specifies the integer file to monitor on
the LCD. When a valid bit file is specified, the Monitoring and Integer
menus are available. Up to the first 48 words of the specified integer file
can be monitored and modified. For more information, refer to Using
Trim Pots described in the MicroLogix 1100 Programmable Controllers
User Manual, publication 1763-UM001.
Jog data update Mode set (JOG)
Feature
JOG - Jog data update
Mode set
Jog data update Mode set (JOG) determines how the value changes are
applied when you press the Up and Down keys to change the data value
for a trim pot. When this bit is set (1), the changes are applied
immediately whenever you press the Up and Down keys. When it is clear
(0), the changes are applied only when you press the OK key after you
have changed the value using the Up and Down keys.
There are three ways to change JOG bit:
• Editing the LCD Function File with your RSLogix 500 programming
tool
• Manipulating this bit using a ladder program
• Using the Advance Set and KeyIn Mode menus on the LCD
Trimpot 0 Data (TMIN – TMAX) (POT0),
Trimpot 1 Data (TMIN – TMAX) (POT1)
Feature
POT0 - Trimpot 0 Data
(TMIN – TMAX)
POT1 - Trimpot 1 Data
(TMIN – TMAX)
Address
Data Format
LCD:0.TIF
word (INT)
Address
Data Format
LCD:0/JOG
binary (bit)
Address
Data Format
LCD:0.POT0
word (INT)
LCD:0.POT1
word (INT)
Publication 1763-RM001C-EN-P - October 2009
LCD - LCD Information
451
Type
User Program
Access
control
read-only
Type
User Program
Access
control
read/write
Type
User Program
Access
status
read-only
status
read-only
Hide quick links:
Advertisement
Table of Contents
