Allen-Bradley MicroLogix 1100 Instruction Set Reference Manual page 270

Hide thumbs Also See for MicroLogix 1100:
Table of Contents

Advertisement

efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
270
Using Interrupts
Publication 1763-RM001C-EN-P - October 2009
STI Error Code
Error
Recoverable Fault
Code
(Controller)
1
Invalid Program File
Number
STI User Interrupt Executing (UIX)
Sub-Element Description
UIX - User Interrupt Executing
The UIX (User Interrupt Executing) bit is set whenever the STI mechanism
completes timing and the controller is scanning the STI PFN. The UIX bit
is cleared when the controller completes processing the STI subroutine.
The STI UIX bit can be used in the control program as conditional logic to
detect if an STI interrupt is executing.
STI User Interrupt Enable (UIE)
Sub-Element Description
UIE - User Interrupt Enable
The UIE (User Interrupt Enable) bit is used to enable or disable STI
subroutine processing. This bit must be set if you want the controller to
process the STI subroutine at the configured time interval.
If you need to restrict when the STI subroutine is processed, clear the UIE
bit. An example of when this is important is if a series of math
calculations need to be processed without interruption. Before the
calculations take place, clear the UIE bit. After the calculations are
complete, set the UIE bit and STI subroutine processing resumes.
STI User Interrupt Lost (UIL)
Sub-Element Description
UIL - User Interrupt Lost
The UIL (User Interrupt Lost) is a status flag that indicates an interrupt was
lost. The controller can process 1 active and maintain up to 2 pending
user interrupt conditions before it sets the lost bit.
This bit is set by the controller. It is up to the control program to utilize,
track if necessary, and clear the lost condition.
Description
Program file number is less than 3, greater than 255, or does not
exist.
Address
Data Format Type
STI:0/UIX
binary (bit)
Address
Data Format Type
STI:0/UIE
binary (bit)
Address
Data Format Type
STI:0/UIL
binary (bit)
status
User Program
Access
status
read only
User Program
Access
control
read/write
User Program
Access
read/write

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1763-l16bbb1763-l16awa1763-l16bwa1763-l16dwd

Table of Contents