Table of Contents
Advertisement
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
482
System Status File
Publication 1763-RM001C-EN-P - October 2009
Baud Rate
(1)
Data Format
Address
S:15 (high byte)
byte
(1) This byte can only be accessed via ladder logic. It cannot be accessed via communications (such as a Message
instruction from another device).
This address is duplicated in the Communications Status File (CSx:0.5/8
through CSx:0.5/15). SeeGeneral Channel Status Block on page 58 for
more information.
Maximum Scan Time
Address
Data Format
S:22
word
This word indicates the maximum observed interval between consecutive
program scans.
The controller compares each scan value to the value contained in S:22. If
a scan value is larger than the previous, the larger value is stored in S:22.
This value indicates, in 100 us increments, the time elapsed in the longest
program cycle of the controller. Resolution is -100 µs to +0 µs. For
example, the value 9 indicates that 800 to 900 us was observed as the
longest program cycle.
User Fault Routine File Number
Address
Data Format
S:29
word
This register is used to control which subroutine executes when a User
Fault is generated.
Range
Type
0 to 255
status
Range
Type
0 to 32,767
status
Range
Type
0 to 255
status
User Program Access
read only
User Program Access
read/write
User Program Access
read only
Hide quick links:
Advertisement
Table of Contents
