Table of Contents
Advertisement
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
Element Description
OFS - PWM Operating Frequency Status
PWM Operating Frequency Status (OFS)
Address
Data Format Range
PWM:0.OFS word (INT)
0 to 20,000 status read only
word (UINT)
0 to 40,000
The PWM OFS (Output Frequency Status) is generated by the PWM
sub-system and can be used in the control program to monitor the actual
frequency produced by the PWM sub-system.
PWM Duty Cycle (DC)
Element Description
Address
DC - PWM Duty Cycle
PWM:0.DC
The PWM DC (Duty Cycle) variable controls the output signal produced
by the PWM sub-system. Changing this variable in the control program
changes the output waveform. Typical values and output waveform:
• DC = 1000: 100% Output ON (constant, no waveform)
• DC = 750: 75% Output ON, 25% output OFF
• DC = 500: 50% Output ON, 50% output OFF
• DC = 250: 25% Output ON, 75% output OFF
• DC = 0: 0% Output OFF (constant, no waveform)
PWM Duty Cycle Status (DCS)
Element Description
Address
DCS - PWM Duty Cycle Status PWM:0.DCS word (INT) 1 to 1000 status read only
The PWM DCS (Duty Cycle Status) provides feedback from the PWM
sub-system. The Duty Cycle Status variable can be used within an input
instruction on a rung of logic to provide PWM system status to the
remaining control program.
Using High-Speed Outputs
Type User Program Access Controller
Data Format
Range
Type
word (INT)
1 to 1000
control read/write
Data
Range
Type
Format
Publication 1763-RM001C-EN-P - October 2009
157
Series
A
B
User Program
Access
User Program
Access
Hide quick links:
Advertisement
Table of Contents
