Paper Tray Settings; Configuring Tray Settings - Xerox VersaLink B7025 User Manual

Paper and Media

Paper Tray Settings

This section includes:
•

Configuring Tray Settings........................................................................................................................................... 148

• Configuring Trays 3 and 4 of the Tandem Tray Module ................................................................................ 148
• Configuring Tray 6 ........................................................................................................................................................ 149
Configuring Tray Settings
The system administrator can set Trays 1–4 of all configurations to Fully Adjustable mode or Dedicated
mode. When a paper tray is set to Fully Adjustable mode, you can change paper settings each time that
you load the tray. When a paper tray is set to Dedicated mode, the control panel prompts you to load a
specific paper size, type, and color.
Note: To configure tray settings, log in as the system administrator. For details, refer to the System
Administrator Guide at www.xerox.com/office/VLB70XXdocs.
To configure the tray settings:
At the printer control panel, touch Device.
1.
2. Touch Paper Trays, then select the required tray.
− To set the mode, touch Tray Mode, then select an option.
− To specify the paper settings for a dedicated tray, ensure that Tray Mode is set to Dedicated,
then set the paper size, type, and color.
To configure the printer to select the tray automatically, touch the Auto Select toggle button.
−
− To set the priority for each tray, touch the plus icon (+) or the minus icon (-). The printer uses
paper from the Priority 1 tray first. If that tray is empty, the printer uses paper from the
Priority 2 tray.
Touch OK.
3.
4. To return to the home screen, press the Home button.
148 Xerox VersaLink
®
User Guide
B7025/B7030/B7035 Multifunction Printer
®