Condensation Has Formed Inside The Printer - Xerox VersaLink B7025 User Manual

Troubleshooting

Condensation has Formed Inside the Printer

Moisture can condense inside a printer where the humidity is above 85% or when a cold printer is
located in a warm room. Condensation can form in a printer after it has been sitting in a cold room that
is heated quickly.
Probable Causes
The printer has been sitting in a cold room.
The relative humidity of the room is too high. • Reduce the humidity in the room.
204 Xerox VersaLink
®
User Guide
Solutions
Allow the printer to operate for several hours at room
temperature.
• Move the printer to a location where the temperature and
B7025/B7030/B7035 Multifunction Printer
®
relative humidity are within the operating specifications.