Paper Misfeeds - Xerox VersaLink B7025 User Manual

Troubleshooting

Paper Misfeeds

Probable Causes
The paper is not correctly positioned in
the tray.
The paper tray is too full.
The paper guides are not correctly adjusted
to the paper size.
The tray contains warped or wrinkled paper.
The paper is moist from humidity.
Using paper of the wrong size, thickness,
or type.
The feed rollers are dirty.
Label and Envelope Misfeeds
Probable Causes
The label sheet is facing the wrong way in the
tray.
Labels are missing, curled, or pulled away
from the backing sheet.
Envelopes are loaded incorrectly.
Envelopes are wrinkling.
218 Xerox VersaLink
®
User Guide
Solutions
• Remove the misfed paper and reposition it properly in
• Adjust the paper guides in the tray to match the size of
Remove some of the paper. Do not load paper past the fill
line.
Adjust the paper guides in the tray to match the size of the
paper.
Remove the paper, smooth it out, and reload it. If it still
misfeeds, do not use that paper.
Remove the moist paper and replace it with new, dry paper.
Use only Xerox approved paper. For details, refer to
Supported Paper
With a clean, lint-free cloth moistened with water, wipe the
feed rollers until they are clean. For details, refer to
the Printer
Solutions
• Load label sheets according to the instructions from the
• Load labels in the tray, face up.
For details, refer to
Do not use any sheet where labels are missing, curled, or
pulled away from the backing sheet.
You can print envelopes from the Bypass tray or Tray 1.
For details, refer to
• The heat and pressure of the laser printing process can
• Use supported envelopes. For details, refer to
Note:
you specify landscape orientation in the print driver.
B7025/B7030/B7035 Multifunction Printer
®
the tray.
the paper.
on page 143.
on page 177.
manufacturer.
Labels on page 167.
Envelopes
cause wrinkling.
for Printing Envelopes on page 163.
When you load envelopes long-edge feed, ensure that
Cleaning
on page 163.
Guidelines