Xerox VersaLink B7025 User Manual page 187

Replacing Staples in the Booklet Maker for the Office Finisher
WARNING: Do not perform this procedure when the printer is copying or printing.
1. Open the finisher side cover.
2. If the staple cartridges are not visible, grasp the vertical panels on each side of the opening and
slide the staple cartridges to the center.
3. Hold the tabs on both sides of the staple cartridge, then pull the cartridge out of the finisher.
Xerox VersaLink B7025/B7030/B7035 Multifunction Printer
® ®
Maintenance
187
User Guide