System Tools
Destination IP/
Domain Name
Interface
2) (Optional) Click Advanced and the following section will appear.
Figure 5-2 Advanced Parameters for Ping Method
Ping Count
Ping Packet Size
3) Click Start.
5.1.2 Configuring Traceroute
Choose the menu System Tools > Diagnostics > Diagnostics to load the following page.
Figure 5-3 Configuring Diagnostics
Follow these steps to configure Diagnostics:
Enter the IP address or the domain name that you want to ping or tracert.
Select the interface that sends the detection packets.
Specify the count of the test packets to be sent during the ping process.
Specify the size of the test packets to be sent during the ping process.
Diagnostics
Configuration Guide
164