Configuring Network
8
IPv6 Configuration
To complete IPv6 configuration, follow these steps:
1) Configure the LAN to specify the type of assigning IPv6 address to the client.
2) Configure the WAN connection.
8.1 Configuring the LAN
Configure the type of assigning IPv6 address to the LAN clients.
Choose the menu Network > IPv6 > LAN to load the following page.
Figure 8-1 Configuring the LAN
1) In the Global section, enable IPv6 function and click Save.
IPv6
2) In the LAN section, configure the Assigned Type and Address prefix, then click Save.
Check the box to enable IPv6 function for the LAN.
IPv6 Configuration
Configuration Guide
36