TP-Link TL-R470T Plus Configuration Manual page 12

Viewing Status Information
Total RX Packets
You can enable Auto Refresh or click Refresh to get the latest statistics information, or
click Clear to clear the current statistics information.
2.2 Viewing the IP Statistics
Choose the menu Status > Traffic Statistics > IP Statistics to load the following page.
Figure 2-2 IP Statistics
Follow these steps to view the traffic statistics of the specific IP addresses:
1) In the Settings section, enable IP Statistics and specify an IP range to monitor.
Enable IP
Statistics
IP Range
2) In the Statistics List section, view the detailed traffic information of the IP addresses.
IP Address
Number
TX Rate (KB/s)
RX Rate (KB/s)
TX Packet Rate
(Pkt/s)
RX Packet Rate
(Pkt/s)
Displays the number of packets received on the interface.
Check the box to enable IP Statistics.
Specify an IP range. The router will monitor the packets whose source IP
addresses or destination IP addresses are in this range, and display the
statistics information in Statistics List.
Displays the number of active users whose IP address is in the specified IP
range.
Displays the rate for transmitting data in kilobytes per second.
Displays the rate for receiving data in kilobytes per second.
Displays the rate for transmitting data in packets per second.
Displays the rate for receiving data in packets per second.
Traffic Statistics
Configuration Guide 5