Chapter 4. Configuring The Router; Login - TP-Link MR5-WR542G User Manual

54m wireless router

Table of Contents

Region - Select your region from the pull-down list. This field specifies the region where the wireless

function of the router can be used. It may be illegal to use the wireless function of the router in a region

other than one of those specified in this field.

Channel - The current channel in use. This field determines which operating frequency will be

used.

Mode - Indicates the current mode 54Mbps (802.11g), 11Mbps (802.11b). If you select 54Mbps

(802.11g), it is compatible with 11Mbps (802.11b).

These settings are only for basic wireless parameters, for advanced settings, please refer to

"Wireless."

Note: The change of wireless settings won't take effect until the router reboots! You can reboot it

manually. If you need instructions as to how to do this, please refer to

Router"

Click the Next button. You will then see the Finish page:

After finishing all configurations of basic network parameters, please click Finish button to exit this

Quick Setup.

Chapter 4. Configuring the Router

This chapter describes each Web page's key functions.

After your successful login, you can configure and manage the router. There are ten main menus on the

left of the Web-based utility. Submenus will be available after you click one of the main menus. The

eleven main menus are: Status, Quick Setup, Network, Wireless, DHCP, Forwarding, Security, IP &

MAC Binding Setting, Static Routing, DDNS and System Tools. On the right of the Web-based utility,

there are the detailed explanations and instructions for the corresponding page. To apply any settings

you have altered on the page, please click the Save button.

The detailed explanations for each Web page key's function are listed below.

MR5-WR542G

Figure 3-10 Quick Setup - Finish

54Mbps Wireless Router User Guide

Section 5.11.5: "Rebooting the

Section 5.5:

Table of Contents